| 水沟电缆槽移动模具应用情况 |
| 添加时间：2019/2/26 13:56:27 浏览次数： |
| 水沟电缆槽移动模具应用情况 Application of Moving Die for Cable Groove in Water Channel 该水沟电缆槽移动模具使用后能确保每环水沟电缆槽施工缝能与衬砌施工缝一致，能确保仰拱沉降变形后不会拉裂水沟电缆槽。 After the use of the movable die for the cable groove, the construction joints of each ring groove can www.liushuicao.cn www.qibijixinghao.com www.ybtongdiao.com www.zunshengbaowen.com www.fayiyiyuan.com gelidun.07858.netbe ensured to be consistent with those of the lining construction joints, and the cable groove of the water groove can not be cracked after the inverted arch is settled and deformed. 该模具可循环使用，简单环保，操作人员少，施工速度快，成型水沟电缆槽美观，各项标准满足验收要求，极具推广价值。 The die can be recycled, simple and environmentally friendly, with fewer operators, fast construction speed, beautiful shaping ditch cable groove, all standards meet the acceptance requirements, and has great popularization value. 局限与建议：该模板长度固定，每循环搭接长度不能过长，否则会损坏上一环成型水沟电缆槽，短衬砌和洞室处无法用该模具，可使用特制木模和钢模进行补缺。 Limitations and Suggestions: The length of the template is fixed, and the overlap length of each cycle should not be too long. Otherwise, the cable groove of the upper ring forming ditch will be damaged. The short lining and cavern can not be filled with the die. Special wood and steel die can be used to fill the gap. |
| 上一页 电缆槽模具材质 |
| 下一页 电缆槽作业施工要求 |